Human D2D (D-dimer) ELISA Kit
| Target Information | |
|---|---|
| Target Name | D2D (D-dimer) |
| Product Properties | |
|---|---|
| Prize | Online Inquiry |
| Reactivity | Human |
| Assay Type | Sandwich-ELISA |
| Assay Time | 3.5 h |
| Detection Range | 6.25-400 ng/mL |
| Sample Type | Plasma |
| Sample Volume | 100 μL |
| Sensitivity | 3.75 ng/mL |
| Specificity | This kit recognizes Human D2D in samples. No significant cross-reactivity or interference between Human D2D and analogues was observed. |
| Research Area | Cardiovascular |
| Reproducibility | Both intra-CV and inter-CV are < 10%. |
| Precision | Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level human D2D were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level human D2D were tested on 3 different plates, 20 replicates in each plate. |
| Storage | -20 ℃. Please refer to the instructions for details. |
Application
This ELISA kit applies to the in vitro quantitative determination of Human D2D concentrations in plasma.
Test Principle
This ELISA kit uses the Sandwich-ELISA principle. The micro ELISA plate provided in this kit has been pre-coated with an antibody specific to human D2D. Standards or samples are added to the micro ELISA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for human D2D and Avidin-Horseradish Peroxidase (HRP) conjugate are added successively to each micro plate well and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain human D2D, biotinylated detection antibody and Avidin-HRP conjugate will appear blue in color. The enzyme-substrate reaction is terminated by the addition of stop solution and the color turns yellow. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 nm ± 2 nm. The OD value is proportional to the concentration of human D2D. You can calculate the concentration of human D2D in the samples by comparing the OD of the samples to the standard curve.
! For research use only. Not intended for any clinical use.